Futaba 18MZA 18-Channel 2.4G T-FHSS with R7008SB TX-Li Ion 18MZ Airplane Version Transmitter 富他巴   [FP-18MZA-WC]

Futaba 18MZ 18-channel 2.4GHz Computer Radio System
In the event that sheer quantity of things you can do with all the 18MZ is impressive, the amount of means it gives you for doing them is absolutely nothing in short supply of awe-inspiring. There's computer software for airplanes, helis and gliders, eight journey conditions and ten programmable mixes for every in addition to numerous factory-programmed mixes. And even more features than you'll most likely use within an eternity of flying.

If that's true, the obvious question is, "Why include them?" The response is simple: it's because no two pilots set up a radio in exactly exact same means. The reason why the 18MZ provides such unparalleled setup and gratification versatility is really so it could be put up within the main means of all: yours.

Features:

• Using the high-voltage R7008SB, your servo and channel alternatives are wide open.Use up to 8 stations with standard PWM outputs,up to 18 stations (16 proportional + 2 switched) through two S.Bus ports, and luxuriate in S.Bus setup ease and programmable performance.
• Built-in 0.3 megapixel digital camera makes using aircraft ID images easy and quick.
• The 6" diagonal (152 mm) HVGA touchscreen display offers 640 x 240 definition and adjustable backlighting for outstanding exposure. SensorTouch technology allows you to navigate and program with rate and simplicity.
• Two USB ports offer easy techniques to connect with a keyboard or mouse, down load and storage space telemetry information or access setups kept on an outside memory stick.
• This serial program provides the exact same convenience once the stand-alone CIU-2. It's well suited for programming GY520 and CGY750 gyros, along with S.Bus and S.Bus2 Servos.
• Stick perspectives adjust easily, to tailor the 18MZ's feel towards hand.
• The 18MZ is sold with a 7.4V, 3500mAh LiPo transmitter battery. Provides energy for 6 hours of uninterrupted flying.
• With Easy Link ID, you'll link the transmitter and receiver with a tap on the touchscreen display.
• Large spacing between neck switches departs room for the hands to rest.
• Eliminating one screw frees the complete switch block. Specific switches can be unscrewed for simple replacement or relocated for a customized setup.
• Look within the 18MZ, and you'll start to see the Futaba's dedication to dependability at every change, from utilization of area mount technology to attenuate the results of vibration to Ball Grid Array to pack many radio at all area.
• Jacks for S.Bus servo development, in-transmitter recharging and also the earphone are observed on the back panel for comfortable access and security.
• The high-voltage R7008SB is compatible with Futaba telemetry sensors, and S.Bus and S.Bus2 servos. Both could be plug straight into the R7008SB, without software bins and decoders required by other systems.* Decoder needed if non-S.Bus servos are utilized.

Overview:

• Channels: 16 proportional, 2 switched
• Compatible with:
  • FASSTest, FASST and S-FHSS protocols
  • Futaba HV (High-Voltage) receivers
  • All Futaba telemetry sensors
• Free on line computer software improvements
• 92MB internal memory
• Expandable model memory
• 32-character user naming
• 32-character model naming
• Airplane, helicopter, glider and motor glider development
• 3 assignable rotary knobs
• 4 assignable slider switches (2/side)
• 5 assignable three-position switches
• 2 assignable two-position switches
• 1 assignable momentary two-position switch
• Double, high-speed processors
• Earphone jack
• 0.3 megapixel camera
• Sound & Movie players
• Built-in microphone
• Programming tools for S.Bus servos & gyros
• Easy Link ID touchscreen
• Comfortable plastic grips regarding sides and back
• Stick calibration, plus stress and angle alterations
• Quad bearing gimbals
• Fast model select
• Servo monitor (neutral and moving tests)
• 2 up/down timers
• Integrated timer system
• Model timer
• 4 vibration caution options (battery, condition, trim mix 1 & 2)
• Programmable trainer system
• Servo speed change
• Trim mix
• Programmable logic switches
• Consumer menu
• Sub-trim (240 steps; channels 1-16)
• Servo reversing (all channels)
• Fail-Safe (all channels)
• Battery fail-safe (all linear networks)
• Endpoint Adjustment (all networks)
• Trim (adjustable step, rate & mode)
• Flight conditions
• AFR
• AFR bend mode (6)
• AFR curve point quantity (15)

Airplane development features:

• 8 trip conditions
• 15 factory-programmed mixes
• Flap environment menu
• Differential ailerons
• Aileron to camber flap mixing
• Aileron to brake flap combining
• Aileron to rudder combining
• Airbrake to elevon Mixing
• Rudder to ailevator mixing
• Rudder to elevator mixing
• Camber blending
• Elevator to camber combining
• Camber flap to elevator blending
• Snap roll mixing
• Airbrake mixing
• V-Tail combining
• Motor combining
• Gas mixture
• Multi-Engine mixing
• Gyro combining

R7008SB Receiver Qualities:

• Bi-directional communication with a FASSTest Futaba transmitter using the S.Bus2 port
• Multiple optional telemetry sensors can be linked to the S.Bus2 slot additionally the information shown on the transmitter
• Includes both standard PWM output ports and S.Bus production ports
• Outside voltage port, 0-70V DC
• The External Voltage connector needed for this will be:FUTM5551 CA-RVIN-700 EX VLT CBL

R7008SB Receiver Specs:

• Getting Frequency: 2.4GHz FASSTest system
• Energy Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
• Present drain: 75mA
• Exterior voltage Port: 0 - 70V DC
• Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
• Body weight: 0.38oz (10.9g)
• Antenna Length: 5-3/4"