Futaba 6EXAP 6-Channel FM 35Mhz/ R136F/ 4xS3003 富他巴   [6EXAP_c5]

價格:
HKD$1,137.63
牌子:
Futaba
型號:
6EXAP_c5
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - System - Transmitter - Flight Transmitters
類別中嘗試尋找類似的產品
填寫評論
FEATURES:
  • Aileron, Elevator and Rudder twin price switch - make use of this switch to ��flip�� between two aileron, elevator and rudder control throw settings. The throws may be arranged however choose, but generally speaking, whenever switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential prices (if utilized).
  • Flap control dial/Channel 6 - This dial runs the servo attached to channel 6 in receiver when your model has flaps this is the control utilized to operate them.Aileron/elevator control stick -Mounting point for optional neck band.
  • Trim levers (all) -Used to move the basic or center position of each servo as labeled into the diagram.
  • Asking jack - Port for charging the transmitter batteries with all the included battery pack charger.
  • On-off switch
  • INFORMATION INPUT lever - accustomed change the values associated with different functions exhibited on the LCD display.
  • Liquid-crystal display (LCD) - Displays development modes and values entered.
  • MODE key - Used to scroll through and display the ten or eleven(PCM) different functions.
  • SELECT key - always display the values for the present function.
  • Throttle-cut button - To use the throttle-cut function, reduced the throttle stick completely, then drive the throttle-cut key to completely close the carburetor and shut of engine.
  • Throttle/rudder control stick - Operates the servos attached to channel 3 (throttle) and channel 4 (rudder) inside receiver.
  • Trainer switch - runs the trainer functions. To use as a trainer switch the transmitter needs to be attached to another transmitter via. a trainer cord (available individually).
  • Retractable landing gear switch/Channel 5 - Switch operates the servo connected to channel 5 in the receiver in case the model has retractable landing gear here is the control always extend and retract the apparatus.
  • Antenna - Radiates signals toward receiver. Never ever fly a model without fully expanding the antenna or you may produce interference to many other modelers and decrease functional sign range of the transmitter. The antenna might be eliminated and replaced with another in the event its accidentally broken.

Copyright © 2013-2024 rcjaz.com.hk 版權所有