Futaba 6EXAP 6-Channel FM 72Mhz/ R156F 富他巴   [6EXAP_c13]

價格:
HKD$896.08
牌子:
Futaba
型號:
6EXAP_c13
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - System - Transmitter - Flight Transmitters
類別中嘗試尋找類似的產品
填寫評論
QUALITIES:
  • Aileron, Elevator and Rudder double rate switch - utilize this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses can be create nevertheless prefer, but generally speaking, when the switch is ��up�� the throws are greater (��high rate��) so when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if used).
  • Flap control dial/Channel 6 - This dial operates the servo linked to channel 6 within the receiver in the event your model has flaps this is the control used to work them.Aileron/elevator control stick -Mounting point for optional neck strap.
  • Trim levers (all) -Used to move the neutral or center position of every servo as labeled into the diagram.
  • Asking jack - Port for billing the transmitter batteries because of the included battery charger.
  • On-off switch
  • INFORMATION INPUT lever - Used to change the values of this different functions exhibited on LCD screen.
  • Liquid-crystal screen (LCD) - Displays programming modes and values joined.
  • MODE key - accustomed scroll through and show the ten or eleven(PCM) different functions.
  • CHOOSE key - always show the values for the present function.
  • Throttle-cut button - to make use of the throttle-cut function, lower the throttle stick all the way, then drive the throttle-cut button to totally shut the carburetor and shut of motor.
  • Throttle/rudder control stick - runs the servos linked to channel 3 (throttle) and channel 4 (rudder) within the receiver.
  • Trainer switch - runs the trainer functions. To use as a trainer switch the transmitter must certanly be connected to another transmitter via. a trainer cable (available separately).
  • Retractable landing gear switch/Channel 5 - change runs the servo connected to channel 5 inside receiver if your model has retractable landing gear here is the control accustomed extend and retract the gear.
  • Antenna - Radiates signals to your receiver. Never fly a model without fully extending the antenna or you may create interference to other modelers and decrease functional sign selection of the transmitter. The antenna are removed and replaced with another whenever it really is unintentionally broken.

Copyright © 2013-2024 rcjaz.com.hk 版權所有