Futaba 6EXAP 6-Channel PCM 35Mhz/ R136HP/ 4xS3003 富他巴  [6EXAP_c7]

價格:
HKD$1,470.84
牌子:
Futaba
型號:
6EXAP_c7
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - System - Transmitter - Flight Transmitters
類別中嘗試尋找類似的產品
填寫評論
QUALITIES:
  • Aileron, Elevator and Rudder double price switch - Use this switch to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses can be set up nevertheless choose, but generally, if the switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential prices (if used).
  • Flap control dial/Channel 6 - This dial operates the servo connected to channel 6 within the receiver when your model has flaps here is the control used to operate them.Aileron/elevator control stick -Mounting point for optional throat band.
  • Trim levers (all) -Used to shift the neutral or center position of each servo as labeled inside diagram.
  • Asking jack - Port for asking the transmitter batteries with all the included battery pack charger.
  • On-off switch
  • INFORMATION INPUT lever - always replace the values regarding the various functions displayed on LCD display.
  • Liquid-crystal screen (LCD) - Displays development modes and values entered.
  • MODE key - Used to scroll through and show the ten or eleven(PCM) various functions.
  • PICK key - accustomed display the values the current function.
  • Throttle-cut key - To use the throttle-cut function, lower the throttle stick entirely, then Push the throttle-cut button to completely close the carburetor and shut regarding the engine.
  • Throttle/rudder control stick - Operates the servos connected to channel 3 (throttle) and channel 4 (rudder) within the receiver.
  • Trainer switch - Operates the trainer functions. To use as a trainer switch the transmitter must be attached to another transmitter via. a trainer cord (available individually).
  • Retractable landing gear switch/Channel 5 - Switch runs the servo linked to channel 5 in receiver if the model has retractable landing gear here is the control always expand and retract the apparatus.
  • Antenna - Radiates signals towards receiver. Never travel a model without completely expanding the antenna or you may produce interference with other modelers and decrease functional sign range of the transmitter. The antenna are eliminated and changed with another just in case its accidentally broken.

Copyright © 2013-2024 rcjaz.com.hk 版權所有