Futaba 6EXAP 6-Channel PCM 35Mhz/ R146IP 富他巴   [6EXAP_c10]

價格:
HKD$989.58
牌子:
Futaba
型號:
6EXAP_c10
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - System - Transmitter - Flight Transmitters
類別中嘗試尋找類似的產品
填寫評論
FEATURES:
  • Aileron, Elevator and Rudder double price switch - utilize this switch to ��flip�� between two aileron, elevator and rudder control throw settings. The throws could be create nevertheless choose, but generally speaking, once the switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch additionally flips between exponential prices (if used).
  • Flap control dial/Channel 6 - This dial runs the servo connected to channel 6 in the receiver if for example the model has flaps here is the control utilized to work them.Aileron/elevator control stick -Mounting point for optional neck band.
  • Trim levers (all) -Used to move the neutral or center position of each servo as labeled inside diagram.
  • Charging jack - Port for charging you the transmitter batteries aided by the included battery pack charger.
  • On-off switch
  • DATA INPUT lever - always change the values associated with the various functions shown regarding LCD display.
  • Liquid-crystal screen (LCD) - Displays programming modes and values entered.
  • MODE key - regularly scroll through and display the ten or eleven(PCM) different functions.
  • CHOOSE key - Used to display the values the current function.
  • Throttle-cut switch - to make use of the throttle-cut function, lower the throttle stick all the way, then drive the throttle-cut switch to fully shut the carburetor and shut regarding the engine.
  • Throttle/rudder control stick - runs the servos connected to channel 3 (throttle) and channel 4 (rudder) in the receiver.
  • Trainer switch - Operates the trainer functions. To use as a trainer switch the transmitter needs to be linked to another transmitter via. a trainer cord (available separately).
  • Retractable landing gear switch/Channel 5 - change operates the servo linked to channel 5 within the receiver if your model has retractable landing gear this is the control always extend and retract the gear.
  • Antenna - Radiates signals to your receiver. Never ever fly a model without completely expanding the antenna or perhaps you may create disturbance to other modelers and decrease operational sign array of the transmitter. The antenna may be eliminated and changed with another just in case it's accidentally broken.

Copyright © 2013-2024 rcjaz.com.hk 版權所有