Futaba GYA352 AVCS Gyro w/ SMM Technology for Airplane 富他巴  [GYA352]

Futaba GYA352 is a two-Axis AVCS airplane gyro, appropriate 2 control surfaces particularly elevator and rudder control. This gyro, when utilized on the elevator and rudder control, can relieve the workload of flying 3D and many hovering maneuvers. AVCS or Angular Velocity Control System is the same as 'heading hold', except that it utilises a gyro sensor that's more accurate and less prone to vibration than old-fashioned gyros. It constantly sends control signals towards servo, even though the axis just isn't going, for incredibly low temperature drift and much more good control for hovering and traveling in crosswinds. With this gyro, you are able to switch AVCS on or off when assigned to an auxillary switch.

Function and show

• This gyro can identify rotations around the X-axis and Y-axis independantly, and will get a handle on aileron and elevator, or elevator and rudder in addition.
• Employing the AVCS system, this gyro constantly maintains the airplane??s mindset even if traveling upright, inverted, upward, downward or knife-edge against unexpected changes in climate like wind.
• The gyro makes traveling easier by doing all of the correction control for you. The gyro immediately eliminates the bad tendencies of your airplane at the same time.
• The gyro has an integrated mixing circuit for elevons and ruddervators.
• Thanks to the acutely low drift associated with the newly developed, high-precision gyro-sensor, according to SMM (Silicon Micro device) technology, trim deviation hardly ever occurs during flight.
• The sensitivity of the gyro may be remotely adjusted through the transmitter. Besides, the AVCS/Normal modes and gyro On/Off can be from another location changed through the transmitter.
• Using high-density area mounting technology we recognized the little size and light weight.
• The conductive resin case improves the resistance to EMI (Electromagnetic interference).

Includes:

• One GYA352
• One plastic adjustment screwdriver
• Three mounting pads
• One instruction sheet

SPECS:

• Measurements: 43x30x35.5mm
• Body weight: 49.5g