HOBBYWING FLYFUN 120A V5 - 30201400 Hobbywing好盈   [HW-30201400]

The DEO technology (Driving Efficiency Optimization) implemented into the
ESC has numerous benefits:
● Rapider and smoother throttle reaction, better stability and flexibility during flight.
● Higher driving effectiveness, longer trip time.
● Lower ESC heat, more reliable procedure.

New soft start-up modes can be applied to regular propeller aircraft and
EDF aircraft with different sizes. With Reverse Brake mode enabled whenever
landing can effectively reduce the sliding distance of the aircraft to
simulate the landing of a real aircraft (within an excellent quick distance,
the FLYFUN 130A/160A-HV-OPTO-V5 doesn’t have this function).
Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode
are also available; the braking system amount is adjustable in normal brake mode
whilst in proportional braking system mode, the brake force will undoubtedly be automatically
allotted based on the position of radio throttle stick.

High-power switch-mode BEC with continuous/peak present of
8A/20A and voltage adjustable among 5.2V, 6.0V and 7.4V permits
users to own more electronics or devices with higher energy
like servo, flight controller, and on-board light on their aircraft.

Multiple protection features include start-up,
over-current, ESC thermal, capacitor thermal,
overload, throttle sign loss (or Fail Safe),
and unusual input voltage efficiently
prolongs the solution life of the ESC.

New design brings exquisite look and good heat-dissipating performance.
Imported elements, the high-performance 32-bit microprocessor, plus the PCB
(printed circuit board) with exceedingly low impedance used by the ESC guarantee
great current stamina, excellent performance and high reliability. The ESC is
obtainable in high-voltage/regular version with various Amps.

Multiple programmable parameters for setups of various fixed-wing
aircraft are adjustable via transmitter or Hobbywing LED program field.

• Brushed/Brushless : BL
• High Voltage/Regular : Regular

• Cont./Peak Current : 120A/150A
• Input : 3-6S LiPo
• Output Wires : change Mode: 5.2V/6V/7.4V, 8A/20A
• Input Connectors : Black-12AWG-150mm*3
• Output Connecotors : No
• Transmitter : 4.0 Gold Connectors (Female)

• LED Program Card : Supported
• LED Program Box : Not Supported
• LCD Program Box : Supported
• WiFi Module : maybe not Supported
• Program Port : Not Supported
• Firmware Upgrade : individual Program Wire

• Size : maybe not Supported

• Weight : 77.2x34.6x19.2mm
• 93g