HOBBYWING FLYFUN 60A V5 - 30214101 Hobbywing好盈  [HW-30214101]

The DEO technology (Driving Efficiency Optimization) implemented into the
ESC has numerous advantages:
● Rapider and smoother throttle response, better stability and freedom during trip.
● Higher driving effectiveness, longer journey time.
● Lower ESC heat, more reliable procedure.

New soft start-up modes can be applied to regular propeller aircraft and
EDF aircraft with various sizes. With Reverse Brake mode enabled whenever
landing can efficiently shorten the sliding distance of this aircraft to
simulate the landing of a real aircraft (within an excellent quick distance,
the FLYFUN 130A/160A-HV-OPTO-V5 doesn’t have this function).
Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode
are available; the brake amount is adjustable in normal brake mode
while in proportional brake mode, the braking system force will soon be immediately
allotted in line with the position of radio throttle stick.

High-power switch-mode BEC with continuous/peak current of
8A/20A and voltage adjustable among 5.2V, 6.0V and 7.4V enables
users to have more gadgets or devices with higher power
like servo, flight controller, and on-board light on the aircraft.

Multiple protection features include start-up,
over-current, ESC thermal, capacitor thermal,
overload, throttle signal loss (or Fail Safe),
and unusual input voltage effortlessly
prolongs the solution life of ESC.

New design brings exquisite look and good heat-dissipating performance.
Imported components, the high-performance 32-bit microprocessor, as well as the PCB
(printed circuit board) with excessively low impedance used by the ESC guarantee
great present endurance, exemplary performance and high reliability. The ESC is
for sale in high-voltage/regular version with different Amps.

Multiple programmable parameters for setups of different fixed-wing
aircraft are adjustable via transmitter or Hobbywing Light-emitting Diode program package.

• Brushed/Brushless : BL
• High Voltage/Regular : Regular

• Cont./Peak Present : 60A/80A
• Input : 3-6S LiPo
• Output Wires : Switch Mode: 5.2V/6V/7.4V, 8A/20A
• Input Connectors : Black-14AWG-150mm*3
• Output Connecotors : No
• Transmitter : 4.0 Gold Connectors (Female)

• LED Program Card : Supported
• LED Program Box : Not Supported
• LCD Program Box : Supported
• WiFi Module : Not Supported
• Program Port : perhaps not Supported
• Firmware Upgrade : individual Program Wire

• Size : Not Supported

• Weight : 68.8x34.6x18mm
• 73.5g