KO Propo 40051 - VFS-1 BMC Brushless Motor Controller 1.5  [KO-40051]

VFS-1 BMC v1.5 #40051
Variation 1.5 for the BMC has proved it self on ROAR Carpet Nationals with 3 TQ roles and two victories inside it's first outting. Five new preset programs and today it is possible to adjust the drag brake through setup switch in 10percent increments (OFF-50%). All specs are exactly the same as the initial 1.0 variation, but you will additionally be able to make the most for the Stock engine Manager for increased rates.

All v1.5 now include the added ROAR Spec function to adhere to the NO timing course. The switch LED will flash at neutral to point that 0 timing has been set to the ESC.

Requirements:

The VFS-1 BMC makes use of KO PROPO's patented VFS technology.
Five preprogrammed settings
Overheat & active Overload protection prepared
Motor Limit: 4.5T (with temperature sink and fan installed, 2.5T)
Size: 33.4 x 37.0 x 16.8 (mm) body weight: 30.8g
Max Peak Current: 3120A (FET Specifications)
Max Continuous Active: 780A (FET Requirements)

VFS technology permits you to definitely plan and fine tune:
Drive frequencies (2KHz~12.0KHz) for 32 throttle steps for lots more control/efficiency
Brake Frequency (500Hz~2.5kHz) 64 settings
Drag Brake (off~255 action modification)
Three battery settings [NiMh (4C), NiMh (5,6C), LiPo(2S)]
For setting help simply click right here.