1/12 scale completed up being the greatest market of on-road electric R/C car competition inside 1980’s and completed up being dominated by the Kyosho Fantom EP-4WD show. However the Fantom enjoyed an excellent rivalry along with the straight back drive 2WD Plazma show, besides developed by Kyosho. The Plazma’s final and ultimate model wound up being the MKIII Limited that is released in 1987. Above three years later it lives yet again in the Kyosho Vintage Series! Like other Vintage Series models, the reborn Plazma MKIII Limited is valid on initial design but features some modern adaptations the most up-to-date R/C systems and energy sources. You'll relive the glory times during the the 1980’s while enjoying the ability and satisfaction of contemporary competition! While sharing some elements along with the Fantom EP-4WD Ext, the simple framework concerning the Plazma causes it to be lighter and faster in comparison to Fantom over circuits with sufficient hold. Like 1987 initial, the prevailing Plazma MKIII Limited features a carbon fibre main framework, although initial black colored colored FRP top dinner and A-shaped joint club are now furthermore produced from carbon fiber. A substantial component differential device is upgraded towards the same superior ball-diff make in to the Fantom EP-4WD Ext Kyosho 60th Anniversary Model circulated in 2023. The actual key suspension system system system system makes use of comparable easy king-pin & coil framework with adjustable caster angle, nevertheless now also includes two king-pin diameter kinds for accuracy modification of control characteristics. The α-2 available cockpit and aerodynamic human body are faithfully reproduced, and all types of kinds of forms of aluminum elements are completed in Kyosho features silver color. As well as effective performance and definitive style, the current Plazma MKIII Limited lights up the Kyosho Vintage Series!
●The long-awaited 1/12 Plazma revival featuring its famous agile 2WD performance will be the sixteenth installment of Kyosho's Vintage Series.
●Recreation about the pure battle Limited Edition model circulated in 1987.
●Retains the most thing design features from 1987 initial but with updated elements to help contemporary R/C systems and power sources.
●All aluminum elements work the Plazma’s unique silver finish.
●Incorporates the proven reliability of 3-point suspension system system system system system standard in 1/12 EP racers.
●Equipped with a high-rigidity carbon primary framework & top supper with an FRP back A-bar that enhances tire hold with moderate flex.
●Features a king-pin coil front suspension system system system system allowing fine tuning of control feel.
●Includes back oil damper with a dial-adjustable springtime anxiety tuning.
●Ball differential is modified by tightening the nut.
●Standard gear includes lightweight and high-strength φ6 carbon right back shaft.
●Unassembled kit includes pre-glued and trued front part and straight back tires and an unpainted body.
Simple rear-wheel-drive 2WD model in the classic design of 1/12 on-road racers through 1980s. Features king-pin springtime front suspension system system system system and a rear 3-point suspension system system system system with A-bar setup.
Includes black colored colored front side part and right back wheels used through Fantom EP-4WD Ext 60th Anniversary Model. After the tires come pre-glued and trued within the kit, you don't have for modification with a tire setter.
King-pin & springtime suspension system system system system system includes springs concerning the top the main element front component knuckle supply. Adjust steering traits by changing caster angle with various diameter king-pins or using set screws. Driving safety may be improved by offsetting the wheel shaft behind the king-pin.
Steering servo is fully guaranteed towards the primary framework with a particular dinner and aluminum mount that replaces the double-sided tape and fiberglass tape mount inside initial. This gives various modern servo sizes become utilised without impacting framework flex faculties.
Lightweight and high-rigidity carbon soluble fbre top dinner is roofed as standard. The oil surprise function a dial system allowing for simple modification of springtime anxiety.
A-bar created from actually versatile black colored colored colored FRP meal functions as right back suspension system system system system system and providing help in method of back axle device.
Includes modified 540-motor suitable engine mount based on the modern Fantom EP-4WD Ext. Changing a large component shaft adapter allows 1mm modification with regards to the wheelbase and 1.3mm for ground approval.
Newly utilized ball-diff product (perhaps not prepared regarding initial Plazma) provides increased traction security through its limited autumn disk (LSD) impact. Original wheel bolts secure the right-side tires and aluminum elements are completed in the Plazma’s unique silver color.
6mm diameter backside shaft is constructed from lightweight high-rigidity carbon, that will effortlessly be included as standard. The shaft supports the ball-diff and boasts high impact-resistance.
High-precision backside left wheel hub adopts the same twin screw clamp system with a silver finish while the Fantom EP-4WD Ext 60th Anniversary Model and prevents loosening during procedure.
Original Plazma MK.IIwe body, well-known for the razor-sharp cornering characteristics, is truly recreated inside new model and yes it's given a distinctive straight back wing for increased right back tire hold.
TECHNICAL INFORMATION
- Length 340mm
- Width 172mm
- Height 83mm
- 3P suspension system system with direct drive
- Wheelbase 203-204mm(Adjustable)
- Tread F: 137mm/R: 133mm
- Tire F: ?48x23mm/R: ?53x35mm
- Gear ratio 3.38: 1
- Weight approx.850g(with GAB4202)
- Maximum Speed approx.55km/h(with Le Mans480G)
- Driving Time approx.23minutes(with Le Mans480G)
KIT CONTENT
- Chassis kit
- Adhesive shaped tire
- Unpainted body
- Decal
- Wheel wrench(12/4.0)
- 5.5/5.0wrench
- Hexagonal wrench
- Caster angle jig
- Shock wrench
- Shock oil
- Ball differential oil
REQUIREMENT TO DO
- Broadcast transmitter with 2 channel, 1-servo(getting size: Max 37x30x16.5mm / Servo size: Max 37x16.5x30mm )
- 1 Electronic rate controller (ESC size: 38x31x23mm)
- 540 system Motor
- Battery for chassis(Battery size: 138x48x24.5mm)
- Batteries for transmitter
- Charger for Battery
- Paint for particular body
- Recommended item: No.82147 Syncro 2.4GHz TX/RX Set / No.82278 Mini Servo KS3031-04M All Metal Gear / No.GAB4202 Gens ace LiPo 4000 straight pack(60C/7.4V)/ No.37035 LE MANS 480GOLD Brushless Engine 21.5T / No.37051B LE MANS 240S ESC
