To bring its dynamic performance to more drivers, the MINI-Z AWD has become available in a Readyset. The MA-020 framework features VCS (variable camber suspension system) on the front side that optimizes camber modification with suspension swing and a specially created circuit board. The framework design allows room for installing the optional gyro device. The gyro can be modified by turning a little volume regarding the chassis to reflect the total amount of steering correction in response to alterations in chassis position, permitting novices to experts to operate a vehicle for their full potential. Completely fitted out with accuracy ball bearings, the high drive efficiency of MA-020 framework is complimented into the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that needs no regularity band environment; all at a good value cost. Merely set the batteries to savor the excitement of drift driving using the included set of drift tires. The framework works with most ASC MINI-Z bodies (additional components maybe needed for some one styles). The MINI-Z AWD promises a unique world of dramatic race action to help you experience and revel in.
●MINI-Z AWD Readyset predicated on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity modification function.
●Drift tires are installed as standard.
●Readyset requires just batteries become prepared to use it!
●Features 2.4GHz Syncro KT-531P transmitter that needs no setup of regularity bands.
●Factory finished body is sold with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber relative to suspension stroke.
●Coil springtime on front suspension system can be simply changed without tools.
●wide selection of optional parts can be acquired to be installed.
●Note) Optional ICS can NOT be utilized. Also, this model is especially designed for the KT-531P transmitter. It isn't appropriate for the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is just compatible with the special gyro device.
Developed due to the fact ultimate FF sports device, the FK8 Civic Type R recorded the fastest time on Nürburgring circuit (Germany) in May 2017. Advanced outside aerodynamics was realistically captured in MINI-Z size.
Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim including dual price modification of steering angle and control the flashing speed of optional LEDs. Also, the transmitter has a Training Mode function which limits speed regarding the vehicle for simple learning (default setting at the time of shipment is Training Mode).
Special AWD Sports framework is based on the MA-02 chassis and features the RA45 device.
Features VCS front suspension that optimizes camber change in concert with suspension system stroke. Replacement of front suspension coil springs is not hard with no tools required.
Loaded with strut-type back suspension system.
Full bearing specifications consist of 14 ball bearings.
Built with drift tires as standard.
Equipped with unique mount area and gyro adjustment amount for the optional gyro unit.
TECHNICAL INFORMATION
- Length 167.0mm
- Width 70.0mm
- Height 52.0mm
- Wheelbase 98.0mm(LL)
- Tread F : 59.5mm R : 59.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset Narrow +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
- R / C unit integral complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- Spare nut
- Wheel wrench
- Pinion removal tool
REQUIREMENT TO RUN
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
