To create its dynamic performance to more drivers, the MINI-Z AWD happens to be obtainable in a Readyset. The MA-020 framework features VCS (variable camber suspension system) regarding the front side that optimizes camber modification with suspension system swing and a specially created circuit board. The framework design permits area for installing the optional MZW431gyro product. The gyro are modified by switching a little volume regarding the chassis to reflect the amount of steering correction responding to alterations in chassis posture, allowing beginners through to experts to push to their complete potential. Fully fitted away with precision ball bearings, the high drive efficiency associated with MA-020 chassis is complimented in Readyset by the initial scale human anatomy and 2.4GHz Syncro KT-531P R/C system that needs no regularity band environment; all at outstanding value price. Just set the batteries to take pleasure from the excitement of drift driving using the included group of drift tires. The framework works with almost all ASC MINI-Z figures (additional parts possibly required for someone designs). The MINI-Z AWD guarantees a distinctive realm of dramatic race action for you to experience and revel in.
●MINI-Z AWD Readyset based on MA-020 framework.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are set up as standard.
●Readyset requires only batteries to be prepared to use it!
●Features 2.4GHz Syncro KT-531P transmitter that needs no setup of regularity bands.
●Factory finished body comes with display model quality finish.
●Features VCS (variable camber suspension system) that adjusts camber relative to suspension system swing.
●Coil springtime on front suspension system can be easily replaced without tools.
●wide selection of optional components is available to be installed.
●Note) Optional ICS can NOT be utilized. Also, this model is especially made for the KT-531P transmitter. It isn't compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It's just compatible with the unique (No.MZW431) gyro product (sold individually).
Kazuyoshi Hoshino & Toshio Suzuki tore up the circuits on their option to triumph in 1990 All Japan Touring vehicle Championship, driving the initial model series to consider an all-wheel drive (AWD) system.
Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim also twin rate modification of steering angle and control the flashing speed of optional LEDs. Besides, the transmitter has an exercise Mode feature which limits rate for the automobile for simple learning (standard setting during shipment is knowledge Mode).
Unique AWD Sports framework is dependant on the MA-02 chassis and features the RA45 unit.
Features VCS front suspension system that optimizes camber improvement in concert with suspension system swing. Replacement of front suspension system coil springs is straightforward without any tools needed.
Loaded with strut-type back suspension system.
Full bearing requirements include 14 ball bearings.
Designed with drift tires as standard.
Loaded with special mount room and gyro adjustment volume for the optional MZW431 gyro product (sold individually).
TECHNICAL DATA
- Length 165.0mm
- Width 71.0mm
- Height 50.0mm
- Wheelbase 94.0mm(L)
- Tread F : 59.5mm R : 59.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Front Wheel Offset Narrow +1.5mm
- Front Wheel Offset large +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
- R / C product built-in complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- Spare nut
- Wheel wrench
- Pinion treatment device
REQUIREMENT TO PERFORM
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter