To create its dynamic performance to more motorists, the MINI-Z AWD is now obtainable in a Readyset. The MA-020 framework features VCS (variable camber suspension system) on front side that optimizes camber change with suspension system swing and a specially designed circuit board. The framework design permits space for installing the optional gyro product. The gyro are modified by turning a little amount in the chassis to reflect the quantity of steering correction in response to changes in framework position, enabling novices to specialists to operate a vehicle for their full potential. Completely fitted out with accuracy ball bearings, the high drive effectiveness of MA-020 chassis is complimented within the Readyset by the unique scale human body and 2.4GHz Syncro KT-531P R/C system that needs no frequency band environment; all at an excellent value cost. Merely set the batteries to take pleasure from the thrill of drift driving aided by the included pair of drift tires. The chassis works with most ASC MINI-Z figures (additional components possibly required for some one designs). The MINI-Z AWD promises a unique world of dramatic racing action for you yourself to experience and revel in.
●MINI-Z AWD Readyset considering MA-020 chassis.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are set up as standard.
●Readyset calls for only batteries become prepared for action!
●Features 2.4GHz Syncro KT-531P transmitter that needs no setup of frequency bands.
●Factory finished body includes display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber prior to suspension system swing.
●Coil springtime on front suspension system can be easily replaced without tools.
●wide range of optional components can be obtained become installed.
●Note) Optional ICS cannot be used. Additionally, this model is particularly created for the KT-531P transmitter. It is really not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It's only appropriate for the special gyro product (sold individually).
Nissan Skyline GT-R V.SpecⅡ Nur (R34)
The final in the Skyline GT-R show, the V. Spec II Nur is Nissan’s last R34. To commemorate the Skyline GT-R, this limited-edition has a racing-based tuned motor and wears the initial Millennium Jade color scheme.
Includes fashionable design of Syncro KT-531P transmitter. Features steering / throttle trim including dual rate adjustment of steering angle and control the blinking rate of optional LEDs. In addition, the transmitter has a Training Mode feature which limits rate of this vehicle for simple learning (standard environment during the time of delivery is knowledge Mode).
Unique AWD Sports framework is based on the MA-02 framework and features the RA45 unit.
Features VCS front suspension that optimizes camber change in concert with suspension system stroke. Replacement of front suspension coil springs is simple with no tools needed.
Built with strut-type back suspension.
Full bearing requirements include 14 ball bearings.
Built with drift tires as standard.
Equipped with special mount space and gyro modification amount for the optional gyro device (offered separately).
TECHNICAL DATA
- Length 167.0mm
- Width 70.0mm
- Height 46.0mm
- Chassis MA-020-N
- Wheelbase 94.0mm(L)
- Tread F : 59.5mm R : 59.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset Narrow +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
/li>- R / C unit built-in complete chassis
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- Spare nut
- Wheel wrench
- Pinion elimination device
REQUIREMENT TO RUN
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
