Serpent SER600039-R Serpent Cobra E-Truggy RTR red [SER600039-R]

價格:

HKD$2,828.87

牌子:

Serpent

型號:

SER600039-R

物品狀況:

全新

數量:

填寫評論

產品說明

Introduction

The Serpent Cobra E-Truggy in RTR trim is a great basher kind automobile that may take plenty of beating and its own additionally an excellent package to start real race ! Based on the Cobra E-Truggy it has the outright rate, great control, dependability, rigidness and durability you need.

The RTR package is actually dialed:
-factory assembled racing chassis
-prepainted and precut low type truggy human body and big composite rear wing
-premounted truggy tyres/wheels/inserts
-pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
-2000kv brushless longbody engine (DragonRC)
-Digital 2.4ghz transmitter (DragonRC)
-Metal gear servo 16kg ( DragonRC-Savox)
-3 oilfilled geardifferentials
-Big bore shocks with plastic dustboots and machined aluminium shocktowers
-Spring steel transmission components and turnbuckles, front and rear cvd driveshafts
-Front and back anti-roll bars
-Large battery-cases with simple felcron straps
-Machined aluminium chassisplate
-Fully ballraced
-Batteries the car and transmitter are not included

The bodyshell comes in orange, red, green, blue and red, and a clear type.

Serpent offers a multitude of optional components for this automobile to improve performance, lighter or even for even nicer appearance.

Main features

Car
Fully expert pre assembled and pre-set chassis and electronic devices.

Transmitter
DragonRc 2.4 GHz steeringwheel type transmitter with lots settings and good range. Comes with little and light receiver.

Speedo
DragonRC waterproof speedcontroller with a massive 150A ability to manage the brushless engine and 4S or 6S battery power

Motor
DragonRC longbody 2000kV brushless motor with easy colorcoded connectors

Body
Prepainted and pre-cut low e-Truggy body, in 4 primary colors orange, red, Green and Blue. ( also clear one available as optional)

Tyres
Premounted battle prepared tyres / tires with soft compounds and pintype profile for incredible grip.

Chassis
Very slim 3mm 7075T6 aluminium chassis, with machining on the upper face making it lighter in strategic areas and to get a handle on flex. Kick-up front side for proper landings. Angled part to increase cornering clearance, and protected and simple mounting part guards with 5 screws. Countersunk holes, pouches to put the suspension system brackets. Overall the Truggy is made to keep carefully the fat extremely main and near the centerline as you possibly can, to generate a good overall stability.

Side guards / battery trays
Durable shaped composite part guards / battery pack trays that stick to the type of the chassis, and mount with 5 screws each side. Front and edges high enough to help keep the dirt away. The guards/trays create plenty of security. The batteries are mounted in longtudinal fashion, maintaining the extra weight low in vehicle. The battery trays features simple to use Serpent marked felcron TM straps to secure the batteries set up. Fits 2S and 3S batteries.

Motormount:
The motor is put within the many optimal position in the automobile, keeping motor-forces and transmission parts / alignment in your mind. Just one-screw is needed to secure the BL motor, in the nicely created durable machined aluminium motormount. Space for additional motor-cooling available as needed. The space for the motor allows mounting all popular buggy and (monster)truggy motors.

Composite chassis braces
Allows the framework to flex which assists improve bump handling. Front and rear.

Front bumper
Nicely rounded front bumper, just like on Cobra buggy, to safeguard the front anti-roll bar, suspension system brackets, and moves inline with kick-up framework front for safe landings.

front side suspension
Very long and durable composite reduced wishbones, combined with upper spring-steel trackrods. 2 lower shock-mount positions. Downstops may be used as required. Pivotball kind anti-roll bar rods.
.
Front steering / servo saver / angled
Innovative angled front steering assembly to reduce the angle of distinction between the full total caster and steering plane. Therefore you should have less bump steer and a truer steering Ackerman through the whole range of suspension.

Adjustable spring loaded servo-saver system with interchangeable Ackermann dishes. Utilizing the design regarding the steering bell cranks when changing the Ackerman you'll not must adjust your steering tie rods. You simply will only must adjust your end points in your radio.. quite simple to gain access to and set-up.

The Inboard Bell crank keeps the lever and linkage within the vehicle. It will aid in preventing injury to the steering system. Zero scrub radiuses on steering knuckle, assists in easing the jacking effect created by your steering knuckle offset. It offers an even more direct fell while maintaining the vehicles chassis more degree while turning.

The front roll center is changed quickly by going the steering knuckle shims for their appropriate locations.

Topped of with a strong composite top-plate.

Front steering-block / c-hubs
Very durable front steeringblock / C-hub set up .

Drive-shafts
Long and lightweight spring steel units with pushed in steel pins, laser-engraved. Exact same length front and rear.

Wheel-axles / wheel-nut
Serpent spring metal threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to keep the huge truggy wheels/tyres on track.

Captured universal joints
Guarantees you may complete a race without loosing a pin or set screw. All parts, axles and drive train elements have actually capture pins

Front shocktower
Light, strong and durable machined 5mm aluminium devices with 5 roles for shockangle.

Shock-set front and rear
16mm big bore shocks, with hard anodized accuracy threaded shock-bodies. Shockboots in silicone plastic to keep the dirt away . Chromed shock-shafts for supersmooth shockaction . The larger o rings provide less overall force and a better seal without dragging regarding shock shaft.

Suspension brackets
The hinge-pins / hingepin balls are captured in durable composite suspension brackets . These capture the nylon roll-center inserts.

Anti-roll bar / anti-roll club linkage with pivotball
The anti-roll pubs front and rear are constructed of quality special spring metal, and so are captured in the diff-cased in ballbearing for perfect guidance and control.

Receiver package / servo mount / speedo mount
Composite one piece radiobox to securely install servoï¿½ s, speedo and receiver. For optimum balance the light receiver fits the top-case effortless, with a little opening allowing cable to protrude. The speedo seats very low on a plate just above the chassis, so brief cables could be used to the motor. The servo is mounted in a vertical fashion.

Central diff
Optimised main gear-diff with 50T super-hard spur-gear . Very small, compact design to lessen rotating mass towards max.

Transmission shafts
Durable but light and slim Serpent spring steel, laser engraved shafts.

Front and rear diff
Optimised gear-diff with superhard spur-gears . Really small, compact design to reduce rotating mass toward maximum. Exact same version front and back. Diff coupler in spring steel seated in big barings for durability.

Rear shocktower
Light, strong and durable machined 5mm aluminum product with 5 roles for shockangle.

Rear uprights
Durable composite back uprights with 3 camber positions

Suspension brackets rear
Durable composite devices with eccentric inserts to improve set-up.

Rear wing mount
The composite rear wing mount, allows to improve the angle associated with the rear wing.

Rear wing
Two stage high down force wing, has two quantities of angle, that also includes 2 fins. Helps improve down force and right line capability

Bodymounts
Nylon bodymounts with wider sitting for the human anatomy, firmly fastened towards shocktowers.

Super Minimal profile e-Truck Body
Improves appearance along with keeps the profile low. Comes precut and prepainted.

Decals
Applied towards human body.

Oils / grease
Car is assembled with high quality silicone oils for the diffs and shocks and black oil. Threadlock used in which needed.

Manual
Full color manual showing the car, specs, recommendations and exploded views. The transmitter and speedo have actually tiny split manuals included.

Box
Full color protective package to re-use for vehicle transportation or tyres.

熱門品牌

Serpent SER600039-R Serpent Cobra E-Truggy RTR red [SER600039-R]