Tamiya 58268 - 1/20 RC Mammoth Dump Truck
Here is the Tamiya 1/20th Scale Electric, rc Mammoth Dump Truck.
This high quality kit is based on the earthshaking mammoth dump trucks found in large scale mining alongside heavy weight jobs.
FEATURES:
Powerful shaft driven 4WD.
Two motors; one 540 size to operate a vehicle the tires; one smaller engine with worm gear shaft for dump body operation.
Kit uses two channel radio for many functions, to raise sleep end car and steer right for one or more 2nd, return steering
to neutral to prevent increasing, guide left for lowering. No importance of costly three channel radios.
Fully operational dump body holds as much as 8.8 pounds (4kg) of product for dumping.
Durable die-cast gears housed ahead and rear sealed gearboxes.
Four wheel suspension loaded with coil and leaf spring surprise devices.
Durable Juggernaut 2 Monster Truck chassis.
Cab and dump body are molded in shock resistant plastic.
6-1/8" (156mm) diameter 2-3/8" (60mm) wide rubber tread tires pre- installed on synthetic metal finish tires.
INCLUDES:
One 1/20th Scale Electrical Radio Control Mammoth Dump Truck with electronic rate control with Futaba J receiver plugs and Standard battery connectors, 6-1/8" (156mm) x 2-3/8" (60mm) plastic tread tires pre-mounted on plastic metal finish tires, one pipe thread locking compound, one 4-way wrench, two pipes of oil, synthetic ties, flat blade screwdriver, human anatomy pins, dual sided tape, two hex wrenches.
REQUIRES:
Radio: 2 channel pistol grip with two servos.
Battery: 7.2v flat stick pack.
Tools: large and tiny blade phillips screwdrivers, tweezers, modeling blade, very long nose pliers, part cutters, scissors, pin vise
and plastic cement.
SPECS: Length: 20-5/8" (525mm)
Width: 11-5/8" (295mm)
Height: 11-13/16" (300mm)
Weight: 12.2 lbs (5.5kg)
RESPONSES:
For replacement bearings use:
1- 5x8 Gear Assembly
3- 5x11 Gear Assembly
1- 5x8 Counter Gearbox
1- 5X11 Counter Gearbox
1- 6x12 Driveshafts
2- 6x12 front side Uprights
2- 6x12 Rear Uprights
2- 3x7 Rack Gearbox
1- 5x8 Rack Gearbox
1- Tamiya MV1 4mm flanged metal bearing Rack Gearbox
2- Tamiya MV1 4mm flanged steel bearing L & R Rack Case Assem.
1- 5x8 L & R Rack Case Assembly