Tamiya 58294 - Tamiya 1/10 R/C High Performance F201 w/Original Body KitThis is the 1/10 Scale Electric Powered, Radio Controlled, 4 Wheel Drive
Tamiya F201 Chassis On-Road automobile Kit.
FEATURES:
Chassis: Monocoque plastic F201 kind.
Drive: Four wheel shaft drive.
Motor: RS 540 sport tuned.
Ball Bearings: Full set included.
Shocks: Oil-filled synthetic bodied.
Gearbox: Closed front and rear.
Differentials: Planetary gear.
Transmission: Single-speed.
Tires: 1.18" (30mm) tread width, 2.4" (62mm) outer diameter, 1.5"
(38mm) inner diameter plastic treaded.
Wheels: 1" (25.5mm) width, 1.6" (40mm) inner diameter grey plastic
spoke.
Speed Control: involved, utilize electronic type for most useful performance.
Bumpers: Front and rear black colored plastic.
suspension system: Adjustable.
Camber Tie Rods: Adjustable. Camber could be the angle of which the tires
sit vertically.
Steering Tie Rods: Adjustable. Caster/Toe-in describes the angle
that the tires aim inward as seen from above.
Steering: Bell-crank type.
Servo Saver: Included.
Body: One clear and something Lexan Carbon Fiber Pattern body with black
plastic back spoiler.
INCLUDES: One Tamiya F201 Chassis with oil-filled shocks, 540 stock engine,
one clear and something polycarbonate patterned human body, treaded rubber
tires, foam inserts, plastic mesh tires, instructions, antenna
tube, decal sheet, hardware, one driver helmet for every single human anatomy,
20 enamel metal pinion gear, 55 enamel plastic spur gear, shock oil.
REQUIRES: broadcast: 2-Channel with one servo.
Radio Batteries: (8) AA size
Speed Control: Electronic.
Battery: 6-cell flat with standard connector, 7 mobile won't fit.
Charger: AC/DC timed or top for 6-cell battery
Paint: Spray or brush-on for polycarbonate plastic bodies.
Misc. Things: Building and track gear
SPECS: VEHICLE-
Length: 16.7" (425mm)
Width: 7.7" (196mm)
Height: 3.3" (100mm)
fat: 3.3 lbs (1480g)(approx.)
Wheelbase: 11.2" (280mm)
Gear Ratio: 2.75:1
Tires- Front and Rear: 1.18" (30mm) tread width, 2.4" (62mm) outer
diameter, 1.5 (38mm) inner diameter plastic treaded.
BODY-
Length: 14.5" (368mm)
Width: 6.25" (159mm) at cockpit (widest point)
1.25" (32mm) at from wheels (thinnest point)
Height: 3.34" (85mm)
COMMENTS: For Substitution Ball Bearings use:
Qty. Size venue Bearing Set Qty.
(4) 10 x 15mm Ball Diffs
(4) 8 x 5mm Ball Diffs
(2) 8 x 12mm Gearbox
(1) 5 x 11mm Gearbox
(1) 5 x 10mm Gearbox
(2) 10 x 15mm back Uprights
(2) 8 x 5mm Steering Arms
(2) 10 x 15mm Front Uprights
(2) 5 x 11mm Drive Shaft
(1) 5 x 10mm Drive Shaft
(1) 5 x 8mm Drive Shaft
(4) 6 x 12mm tires
