XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car  [XR-340007]

XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car
價格:
HKD$6,655.36
牌子:
XRAY
型號:
XR-340007
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - On-Road - Touring Cars - Nitro Powered
類別中嘗試尋找類似的產品
填寫評論
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
alt="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car" title="XRAY 340007 - Xray RX8.2 - 1/8 Luxury Nitro On-road Car"
All-new 2018:
  • All-new chassis features bigger front side window opening for enhanced ahead traction
  • All-new chassis with exclusive, revolutionary front flex adjustment utilizing a removable aluminum brace. Using the aluminum brace increases steering response and cornering speed; with no aluminum brace, the vehicle is easier to push.
  • All-new adjustable weight place on both sides of framework for fast & simple fat balance adjustment
  • All-new rear layshaft bulkheads allow usage of bracket bushings for connecting the layshaft bulkheads with back bulkheads to strengthen the entire rear suspension system, giving improved managing especially in high-traction conditions. With no bracket bushings, the vehicle has more traction; recommended for low-traction conditions. The new bulkhead design also enables installing a top graphite brace.
  • All-new rear aluminum bulkheads
  • All-new graphite brace for back layshaft is the main back suspension Multi-Flex™ Technology
  • All-new graphite holders for back upper arm have brand new jobs – lower & more inside – for increased traction and enhanced durability
  • All-new back aluminum suspension system holders have brand new place the back hands – more inside – for increased traction
  • All-new steel extensions for suspension arms have a fresh place to operate better with brand new backside aluminum suspension holders

General
  • Developed, designed, and styled by Martin Hudy, produced solely by XRAY in Europe on earth's many advanced RC manufacturing facility
  • Pure rushing design, premium luxury quality, highest performance
  • Premium, exclusive, and high-tech materials used throughout
  • Unique, super-strong composite materials with XRAY's self-developed secret ingredient mixtures for suspension system and drivetrain parts
  • Super-low CG 1/8 on-road vehicle platform
  • Easy-access to drivetrain components for super-quick rebuilds and set-up changes

Chassis
  • Chassis openings machined at front & backside of framework for additional weights
  • Chassis design with larger opening screen under front suspension for better forward traction
  • Chassis design allows to mount front chassis brace into the framework to reinforce leading flex for better steering response
  • Aluminum primary frame & backbone
  • Rear layshaft bulkheads allows to mount the shim which links the layshaft bulkheads with rear bulkheads which reinforces the entire rear suspension for improved steering and rotation in high traction conditions
  • High-precision CNC-machined aluminum bulkheads, suspension system holders, and chassis
  • Light & strong help framework with maximum flex characteristics for increased traction
  • CNC-machined 5mm Swiss 7075 T6 aluminum chassis
  • Super-narrow chassis increases framework flex, yields more traction and steering
  • Smooth chassis underside with countersunk fasteners, chamfered edges to stop contact during cornering
  • Special framework openings machined at front & back of framework for extra weights
  • Strategic chassis cut outs for optimized flex characteristics, centric engine mount holes for enhanced flex
  • Centerline chassis holes are pre-drilled for easy balancing with all the HUDY Chassis Balancing Tool #107880.
  • CNC-machined Swiss 7075 T6 aluminum bulkheads provide improved tightness & flex faculties for better steering characteristics, offer easy access to all or any components. Built-in front side & back gear tension modification. Included muffler mount in left front bulkhead eliminates negative flex impact.
  • Aluminum front & back upper clamps, made to fit aluminum bulkheads. Front clamps support the front shock tower, front top supply mount; back clamps hold rear surprise tower, graphite top supply holders.
  • Aluminum front top arm holders built to utilize the aluminum bulkheads, and offer optimal flex adjustment. Easy position adjustment for increased caster angle and improved cornering speed.
  • Aluminum middle shaft holder made to utilize aluminum bulkheads, acts as gear tensioner the front & side belts.
  • CNC-machined 2.5mm graphite radio plate. Quick & easy treatment for servicing and cleaning.
  • Radio plate flex is adjusted individually from chassis flex, using either fixed or flex bushing.
  • Radio plate alum mounts are made to match the aluminum frame. Lightweight mounts give enhanced flex characteristics and durability.
  • Low-profile 125cc gas tank gives for enhanced gas movement, ensuring more stable & consistent engine procedure at reduced fuel amounts. Hypertonic tank lid and interior stone-type filter is positioned in the middle of the automobile and sits only possible
  • fuel tank mounting atop the air plate on alum articles with plastic grommets for simple insertion & treatment from the car, enables simple cleaning and maintenance
  • Original XRAY fuel tank uses the well-proven leak-free, super-durable cap from NT1
  • Low-CG battery pack owner situated under the fuel tank. Optional graphite with integrated Multi-Flex Technology™ functionality. Optional brass battery holder adds fat toward bottom associated with the car.
  • distinctive compact lightweight radio instance with clean design and internal design for receiver and optional on-off switch

Suspension
  • Advanced suspension geometry precision engineered and finely tuned for high-competition racing
  • Lightweight, durable, and reinforced suspension system parts molded from XRAY's self-developed composite mixture for suspension components. Each suspension component is molded from a high-tech composite that's specially developed for the particular part.
  • CNC-machined Swiss 7075 T6 front & rear suspension system holders, fully independent from the bulkheads, mounted right to the framework to improve traction and work out the vehicle easier to drive.
  • Rear top supply holders, machined from 3.5mm graphite product for optimized flex traits.
  • Highly-polished, high-tensile metal suspension pivot pins give smooth suspension action, feature machined groove for better affixing by setscrew
  • I.S.S. (incorporated Suspension Settings™) for completely integrated adjustment possibilities.
  • Full suspension adjustment via square eccentric bushings in-front top and rear upper/lower bulkheads.
  • Tiny, tough steering obstructs made from special composite combination have 0° kingpin (+1° and -1° kingpin steering blocks recommended). Accommodates graphite aerodynamic disks.
  • Aluminum steering block extensions with three Ackermann positions are mounted towards steering obstructs with two screws
  • Small, robust back uprights function two easily-adjustable top roll center roles for traction adjustment. Uprights function two human body mounting modification roles to use different human anatomy kinds. Accommodates graphite aerodynamic disks.
  • Concentric & eccentric bushings in the front steering blocks & rear uprights allow simple adjustment of roll center, caster, wheelbase, and axle height
  • Easily-adjustable wheelbase & weight stability and caster adjustment via positioning clips
  • Choice of front anti-roll bar systems: cable or blade-type (both included)
  • Front and back cable anti-roll pubs supported by ball-bearings
  • Both front wire and blade anti-roll pubs within the kit
  • Optional front side & back anti-roll club cables designed for fine tuning
  • Premium Hudy Spring Steel™ adjustable turnbuckles with stiff core
  • Precision-ground metal pivot balls included for robustness and enhanced lifespan; optional lightweight aluminum and titanium pivot balls available
  • Strong M10 composite nuts for minimal fat and smooth pivot ball movement
  • Front steering block & back uprights function concentric and eccentric bushings which enable roll center adjustment plus positive caster modification in front. Back upright eccentric bushings enable separate wheelbase & axle height adjustment.

Engine & Clutch
  • Quick-set aluminum engine mount system with fixed engine position for super-easy motor installation and gear mesh adjustment
  • Easily-adjustable 3-shoe XCA (XRAY Centrifugal-axial) clutch with 4-bearing clutchbell for superior durability, smooth & quick acceleration, increased clutch shoe lifespan
  • Clutchbell, clutch nut, flywheel nut, thrustbearing collar made of unique HUDY Spring Steel™ for maximum lifespan and durability
  • Hardcoated flywheel, clutch dis, spring glass made of premium Swiss 7075 T6 aluminum
  • Clutchbell / pinion gear construction allows super-precise assembly
  • Swiss 7075 T6 machined pinion gears, specially made for 1/8 on-road, for greatly improved durability and strength. Pinion gear teeth are individually machined on a high-precision gear manufacturing device; special hardcoating assures maximum life
  • Carbide axial thrust-bearing and high-tensile spring
  • Small diameter aluminum flywheel improves the motor base power and acceleration

Brakes
  • Strong, highly-efficient brake system
  • Laser-cut, accuracy flat-ground ventilated metal brake disk with extra-deep machined grooves for light-weight and exemplary temperature dissipation, optimum braking efficiency and super-smooth braking action; strategically-placed air flow holes ensure minimal brake pad use and super-true, wobble-free rotation
  • Brake disk and braking system backing pads are heat-treated for optimum performance and lifespan
  • Special return softer springs ensure appropriate space between brake pads
  • CNC-machined metal braking system cam is ball-bearing supported for super smoothness and exact braking system control

Drivetrain
  • Smooth and efficient 1/8 on-road drivetrain
  • Ultra-smooth, highly-efficient belt/pulley drivetrain with super-low rotating mass
  • Front middle shaft owner offers effortless front gear & pulley access and easier maintenance
  • Exclusive usage of HUDY Spring Steel™ in drivetrain components gives greatest performance and unmatched lifespan
  • High-performance HUDY Spring Steel™ front CVD drive shafts; rear dogbone-style HUDY Spring Steel™ drive shafts
  • Super-lightweight wheel axles & axle outdrives are CNC-machined from HUDY Spring Steel™
  • PUR®-reinforced high-efficiency, low-friction, fine-pitch drive belts
  • Pulleys molded from super-low friction composite product for extra-long lifespan, pulley covers function self-cleaning holes
  • Complete group of high-speed, blue-sealed ball-bearings, degreased, lightly oiled with Aero Shell Fluid 12™ for maximum drivetrain efficiency
  • Graphite side-belt tensioner made to utilize alum framework. Effortless gear modification, effortless reduction.

2-Speed Transmission
  • Superior, robust 2-speed transmission with little & light gears, exemplary bottom-end power & acceleration
  • Small & lightweight gear provider, aluminum drive flange with 1-way bearing
  • Small & lightweight gears from well-proven NT1 for fast acceleration and low rotating mass
  • Gears from graphite product contained in the kit for improved durability for the transmission
  • Precision-manufactured, super-smooth lightweight hollow center layshaft created from tough HUDY Shaft metal, specifically heat addressed for extra energy and long life
  • High-quality 1-way bearing hand-ground for optimum running accuracy and strength
  • 2-speed spur gear adapter CNC-machined from Swiss 7075 T6 for precision fitment of 1-way bearing, permitting super-precise and wobble-free spur gear installation
  • World's most exact spur gears molded from unique composite combination guarantees wobble-free operating and eliminates run-out
  • 2-speed gearbox shoes molded from special composite mixture

Axles
  • Front super-lightweight one-way axle created from Swiss 7075 T6 alum for super-low rotating mass and low CG
  • Rear axle made from HUDY Spring Steel™ with composite lightweight axle pulley
  • One-way outdrives manufactured from HUDY Spring Steel™ and specially ground for optimum precision

Steering
  • Centralized servo saver is ball-raced for super-precise, smooth operation
  • Adjustable springtime preload tension
  • Easily-changed Ackermann jobs

Shocks
  • Shock pistons with 2- and 3-hole designs and 1.0/1.1/1.2mm holes, produced from special Delrin™ material to make certain extreme roundness and extra-smooth damping
  • CNC-machined surprise figures made from Swiss 7075 T6 aluminum, externally fine-threaded for exact trip height adjustment
  • Low-profile interior membranes for super-smooth, precise damping
  • Specially-hardened shock shafts for maximum strength
  • XRAY self-developed and manufactured race springs are hand-selected and tested for optimum accuracy, equal length, and equal damping characteristics
  • Compact front side & back CNC-machined graphite shock towers
  • XRAY Premium Silicone natural oils are included. Manufactured in Europe by a specialized premium silicone oil maker, each batch of premium oil is laboratory tested and calibrated to guarantee the maximum persistence and quality batch-to-batch. On the basis of the industry-standard cSt rating.

Body & Wheels
  • Optional CNC-machined high-strength graphite aerodynamic disks improve both low & high-speed steering, improve backside traction, and enhance stability in high-speed corners.
  • front side human body posts, CNC-machined from Swiss 7075 T6 alum, furthermore lightened for minimal weight.
  • Special composited rear human anatomy mount features 3 roles for back upright downforce adjustment.
  • Tough composite back body mount holder allows mounting of all popular sporting figures and meets all EFRA / IFMAR rules.
Assembly & Support
  • Premium 3D full-color guide is included
  • Comprehensive Set-up Book can be acquired on line as a free of charge download
  • Exclusive Virtual on the web Set-up Sheet database with huge number of set-up sheets for competition songs around the world
  • Premium, unmatched XRAY online support

Adjustment Possibilities
  • Fully-adjustable front and rear suspension system geometry: caster, camber, toe, ride height, droop, wheelbase, track-width, roll centers, axle height, wheel offset
  • XRAY Multi-Flex Technology™ allows for quick & effortless chassis and radio dish stiffness adjustment
  • Adjustable front side & back roll centers
  • Adjustable gear stress via bulkhead inserts, part gear tensioner, front center shaft owner position
  • Adjustable HUDY Spring Steel™ turnbuckles (steering, servo, back top links)
  • Adjustable Ackermann positions
  • Front & back top and lower surprise mounting locations
  • Adjustable aluminum rushing shocks
  • Adjustable front anti-roll bars, blade or wire type
  • Adjustable wire-type back anti-roll bar
  • Adjustable fat stability

備註 :
由於庫存數量有限, 某些 XRAY 產品可能要特別從製造商訂購, 所需準備時間約為4-6週, 如我們庫存未能提供訂單上的某些產品, 我們將直接為客人從製造商訂購而買家須接受該所需的準備時間。

Copyright © 2013-2024 rcjaz.com.hk 版權所有