XRAY 340151 - Xray RX8e.2 - 1/8 Luxury Electric On-road Car [XR-340151]

價格:

HKD$6,286.57

牌子:

XRAY

型號:

XR-340151

售罄

請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.

你或可於 R/C Models - On-Road - Touring Cars - Electric Powered
類別中嘗試尋找類似的產品

填寫評論

alt="XRAY 340151 - Xray RX8e.2 - 1/8 Luxury Electric On-road Car" title="XRAY 340151 - Xray RX8e.2 - 1/8 Luxury Electric On-road Car"

產品說明

All-new 2018:

All-new framework features larger front side screen opening for improved ahead traction
All-new framework with unique, revolutionary front flex modification making use of a detachable aluminum brace. Using the aluminum brace increases steering response and cornering rate; without aluminum brace, the car is a lot easier to push.
All-new adjustable weight position on both sides associated with the framework for quick & simple weight balance adjustment
All-new rear layshaft bulkheads allow use of bracket bushings to connect the layshaft bulkheads with back bulkheads to strengthen the entire back suspension system, giving enhanced handling especially in high-traction conditions. Without bracket bushings, the automobile has more traction; recommended for low-traction conditions. This new bulkhead design additionally enables installing of a top graphite brace.
All-new back aluminum bulkheads
All-new graphite brace for back layshaft is an element of the rear suspension Multi-Flexâ¢ Technology
All-new graphite holders for back top supply have actually new roles â lower & more inside â for increased traction and enhanced durability
All-new backside aluminum suspension system holders have actually new position for the rear hands â more inside â for increased traction
All-new steel extensions for suspension system arms have actually a brand new place to function better with new backside aluminum suspension system holders

General

Developed, created, and styled by Martin Hudy, manufactured exclusively by XRAY in Europe on earth's most sophisticated RC production facility
Pure rushing design, premium luxury quality, highest performance
Premium, exclusive, and high-tech materials used throughout
Unique, super-strong composite materials with XRAY's self-developed secret compound mixtures for suspension and drivetrain components
Super-low CG 1/8 on-road vehicle platform
Easy-access to drivetrain components for super-quick rebuilds and set-up changes

Chassis

Chassis spaces machined at front & back of chassis for additional weights

Chassis design with bigger opening screen under front suspension for better forward traction
Chassis design enables to mount front framework brace in to the chassis to reinforce the front flex for better steering response
Aluminum main frame & backbone
Rear layshaft bulkheads permits to mount the shim which connects the layshaft bulkheads with rear bulkheads which reinforces the complete rear suspension for improved steering and rotation in high traction conditions
High-precision CNC-machined aluminum bulkheads, suspension system holders, and chassis
Light & strong support framework with maximum flex characteristics for increased traction
CNC-machined 5mm Swiss 7075 T6 aluminum chassis
Super-narrow framework increases chassis flex, creates more traction and steering
Smooth chassis underside with countersunk fasteners, chamfered edges to stop contact during cornering
Special chassis openings machined at front & back of chassis for extra weights
Strategic framework cut outs for optimized flex traits, centric engine mount holes for enhanced flex
Centerline framework holes are pre-drilled for easy balancing using the HUDY Chassis Balancing Tool #107880.
CNC-machined Swiss 7075 T6 aluminum bulkheads offer enhanced tightness & flex faculties for better steering faculties, give easy access to all components. Incorporated front & back belt stress adjustment. Included muffler mount in remaining front side bulkhead eliminates negative flex impact.
Aluminum front & rear top clamps, designed to fit aluminum bulkheads. Front clamps contain the front shock tower, front upper supply mount; rear clamps hold back surprise tower, graphite top supply holders.
Aluminum front top arm holders designed to utilize the aluminum bulkheads, and offer optimal flex adjustment. Easy place modification for increased caster angle and improved cornering speed.
Aluminum center shaft holder built to use aluminum bulkheads, will act as belt tensioner for the front & part belts.
CNC-machined 2.5mm graphite radio dish. Fast & effortless treatment for servicing and cleaning.
Radio dish flex is adjusted separately from framework flex, making use of either fixed or flex bushing.
Radio plate alum mounts are designed to fit into the aluminum framework. Lightweight mounts give improved flex traits and durability.
Low-profile 125cc gas tank gives for improved gas motion, ensuring more stable & consistent motor procedure at lower fuel amounts. Hypertonic tank lid and interior stone-type filter is positioned in the middle of the car and sits as low as possible
fuel tank mounting atop radio stations dish on alum posts with rubber grommets for easy insertion & reduction from the vehicle, allows effortless cleaning and maintenance
Original XRAY fuel tank uses the well-proven leak-free, super-durable cap through the NT1
Low-CG battery pack owner situated under the gas tank. Optional graphite with integrated Multi-Flex Technologyâ¢ functionality. Optional brass battery pack holder adds fat on base for the car.
Unique compact lightweight radio instance with clean design and interior design for receiver and optional on-off switch

Suspension

Advanced suspension system geometry precision engineered and finely tuned for high-competition racing
Lightweight, durable, and reinforced suspension system parts molded from XRAY's self-developed composite combination for suspension parts. Each suspension system part is molded from a high-tech composite which particularly developed for the particular part.

CNC-machined Swiss 7075 T6 front & back suspension system holders, fully independent from bulkheads, mounted right to the framework to improve traction and make the car simpler to drive.
Rear top arm holders, machined from 3.5mm graphite product for optimized flex traits.
Highly-polished, high-tensile metal suspension pivot pins give smooth suspension action, feature machined groove for better affixing by setscrew
I.S.S. (incorporated Suspension Settingsâ¢) for completely incorporated modification possibilities.
Full suspension system modification via square eccentric bushings in front upper and rear upper/lower bulkheads.
Tiny, tough steering blocks created from unique composite combination have 0Â° kingpin (+1Â° and -1Â° kingpin steering obstructs recommended). Accommodates graphite aerodynamic disks.
Aluminum steering block extensions with three Ackermann positions are installed towards the steering obstructs with two screws
Small, robust back uprights feature two easily-adjustable upper roll center jobs for traction modification. Uprights function two human body mounting modification positions to make use of different body types. Accommodates graphite aerodynamic disks.
Concentric & eccentric bushings right in front steering obstructs & rear uprights allow easy modification of roll center, caster, wheelbase, and axle height
Easily-adjustable wheelbase & fat stability and caster modification via positioning clips
Choice of front side anti-roll bar systems: cable or blade-type (both included)
Front and rear wire anti-roll bars supported by ball-bearings
Both front cable and blade anti-roll pubs within the kit
Optional front side & back anti-roll club wires readily available for fine tuning
Premium Hudy Spring Steelâ¢ adjustable turnbuckles with stiff core
Precision-ground steel pivot balls included for robustness and improved lifespan; optional lightweight aluminum and titanium pivot balls available
Strong M10 composite nuts for minimal weight and smooth pivot ball movement
Front steering block & rear uprights feature concentric and eccentric bushings which allow roll center adjustment including positive caster adjustment right in front. Back upright eccentric bushings enable separate wheelbase & axle height adjustment.

Engine & Clutch

Quick-set aluminum motor mount system with fixed engine position for super-easy engine installation and gear mesh adjustment
Easily-adjustable 3-shoe XCA (XRAY Centrifugal-axial) clutch with 4-bearing clutchbell for superior durability, smooth & quick acceleration, increased clutch footwear lifespan
Clutchbell, clutch nut, flywheel nut, thrustbearing collar made of special HUDY Spring Steelâ¢ for optimum lifespan and durability
Hardcoated flywheel, clutch dis, spring cup constructed from premium Swiss 7075 T6 aluminum
Clutchbell / pinion gear construction permits super-precise assembly
Swiss 7075 T6 machined pinion gears, particularly designed for 1/8 on-road, for greatly enhanced durability and strength. Pinion gear teeth are separately machined on a high-precision gear manufacturing machine; unique hardcoating assures maximum life
Carbide axial thrust-bearing and high-tensile spring
Small diameter aluminum flywheel improves the engine bottom energy and acceleration

Brakes

Strong, highly-efficient brake system
Laser-cut, accuracy flat-ground ventilated steel brake disk with extra-deep machined grooves for light-weight and exceptional heat dissipation, maximum stopping efficiency and super-smooth braking action; strategically-placed air flow holes guarantee minimal braking system pad use and super-true, wobble-free rotation
Brake disk and braking system backing pads are heat-treated for maximum performance and lifespan
Special return softer springs ensure appropriate gap between braking system pads
CNC-machined metal brake cam is ball-bearing supported for super smoothness and accurate braking system control

Drivetrain

Smooth and efficient 1/8 on-road drivetrain
Ultra-smooth, highly-efficient belt/pulley drivetrain with super-low rotating mass
Front center shaft holder provides effortless front belt & pulley access and easier maintenance
Exclusive usage of HUDY Spring Steelâ¢ in drivetrain parts offers greatest performance and unmatched lifespan
High-performance HUDY Spring Steelâ¢ front CVD drive shafts; back dogbone-style HUDY Spring Steelâ¢ drive shafts
Super-lightweight wheel axles & axle outdrives are CNC-machined from HUDY Spring Steelâ¢
PURÂ®-reinforced high-efficiency, low-friction, fine-pitch drive belts
Pulleys molded from super-low friction composite material for extra-long lifespan, pulley covers feature self-cleaning holes
Complete group of high-speed, blue-sealed ball-bearings, degreased, lightly oiled with Aero Shell Fluid 12â¢ for maximum drivetrain efficiency
Graphite side-belt tensioner built to utilize alum framework. Easy gear adjustment, effortless reduction.

2-Speed Transmission

Superior, robust 2-speed transmission with tiny & light gears, excellent bottom-end energy & acceleration
Small & lightweight gear provider, aluminum drive flange with 1-way bearing
Small & lightweight gears from well-proven NT1 for quick acceleration and low rotating mass
Gears from graphite material included in the kit for improved durability associated with the transmission
Precision-manufactured, super-smooth lightweight hollow center layshaft produced from tough HUDY Shaft metal, specifically temperature treated for extra power and long life
High-quality 1-way bearing hand-ground for maximum operating accuracy and strength
2-speed spur gear adapter CNC-machined from Swiss 7075 T6 for accuracy fitment of 1-way bearing, enabling super-precise and wobble-free spur gear installation
World's most precise spur gears molded from unique composite mixture ensures wobble-free running and removes run-out
2-speed gearbox footwear molded from special composite mixture

Axles

Front super-lightweight one-way axle created from Swiss 7075 T6 alum for super-low rotating mass and low CG
Rear axle made from HUDY Spring Steelâ¢ with composite lightweight axle pulley
One-way outdrives made of HUDY Spring Steelâ¢ and specially ground for optimum accuracy

Steering

Centralized servo saver is ball-raced for super-precise, smooth operation
Adjustable spring preload tension
Easily-changed Ackermann jobs

Shocks

Shock pistons with 2- and 3-hole designs and 1.0/1.1/1.2mm holes, created from unique Delrinâ¢ material to make sure extreme roundness and extra-smooth damping
CNC-machined surprise systems produced from Swiss 7075 T6 aluminum, externally fine-threaded for accurate ride height adjustment
Low-profile internal membranes for super-smooth, exact damping
Specially-hardened surprise shafts for optimum strength
XRAY self-developed and manufactured racing springs are hand-selected and tested for maximum precision, equal length, and equal damping characteristics
Compact front & back CNC-machined graphite shock towers

XRAY Premium Silicone natural oils are included. Stated in Europe by a specialized premium silicone oil maker, each batch of premium oil is laboratory tested and calibrated to guarantee the maximum consistency and quality batch-to-batch. On the basis of the industry-standard cSt rating.

Body & Wheels

Optional CNC-machined high-strength graphite aerodynamic disks improve both low & high-speed steering, improve rear traction, and improve stability in high-speed corners.
Front body posts, CNC-machined from Swiss 7075 T6 alum, furthermore lightened for minimal fat.
Special composited rear human body mount features 3 positions for rear upright downforce adjustment.
Tough composite back human anatomy mount holder allows mounting of popular racing systems and satisfies all EFRA / IFMAR rules.

Assembly & Support

Premium 3D full-color instructions is included
Comprehensive Set-up Book can be acquired on line as a free of charge download
Exclusive Virtual on the web Set-up Sheet database with large number of set-up sheets for battle tracks across the world
Premium, unmatched XRAY on line help

Adjustment Possibilities

Fully-adjustable front side and back suspension geometry: caster, camber, toe, trip height, droop, wheelbase, track-width, roll centers, axle height, wheel offset
XRAY Multi-Flex Technologyâ¢ enables quick & simple chassis and radio plate stiffness adjustment
Adjustable front & rear roll centers
Adjustable gear tension via bulkhead inserts, side gear tensioner, front center shaft owner position
Adjustable HUDY Spring Steelâ¢ turnbuckles (steering, servo, rear top links)
Adjustable Ackermann positions
Front & back top and reduced surprise mounting locations
Adjustable aluminum rushing shocks
Adjustable front anti-roll bars, blade or cable type
Adjustable wire-type backside anti-roll bar
Adjustable weight balance

備註 :

由於庫存數量有限, 某些 XRAY 產品可能要特別從製造商訂購, 所需準備時間約為4-6週, 如我們庫存未能提供訂單上的某些產品, 我們將直接為客人從製造商訂購而買家須接受該所需的準備時間。

熱門品牌

XRAY 340151 - Xray RX8e.2 - 1/8 Luxury Electric On-road Car [XR-340151]